EG324 IoT Gateway
April 27, 2022
ER200 Compact Industrial Cellular Router
May 18, 2023
EC212 Industrial DTU
$115.00 – $160.00
Elastel EC212 is an ARM-based embedded computer designed as a compact industrial DTU for OT-to-IT applications.
- ★ ARM Cortex-A7 @1.1GHz, 64MB RAM +256MB Flash
- ★ Rich industrial interfaces for versatile connectivity
- ★ Industrial-grade design for Reliability, CE FCC… certified
- ★ Built-in OT-to-IT software, supports open secondary development
Description
Elastel EC212 is an ARM-based industrial computer designed as a compact, cost-effective industrial DTU for edge connectivity, data acquisition and communication, and other applications.
It features 2 x RS485/232 serial ports, 1x 10/100 Mbps Ethernet port, and a miniPCIe socket for 4G LTE/3G/2G/NB-IoT and Wi-Fi connectivity.
Its full industrial-grade design ensures reliable operation in -40 °C to +85 °C and harsh EMI/surge harsh environments, backed by CE, FCC, and RoHS certifications.
Leverage the preloaded ElastPro software on Linux OS to make the EC212 ready for large-scale OT-to-IT integration, as well as tailor-made applications.
Specification
| CPU | ARM Cortex-A7 @ 1.1GHz |
|---|---|
| RAM | 64MB |
| Storage | 256MB |
| Storage Expansion | 1x TF Slot |
| Serial Port (Isolated) | 2 x RS232/485 |
| Ethernet Port | 1x 10/100 Mbps |
| Wireless Module Slot | 1 x mPCle slot for Cellular module or Wi-Fi module |
| Antenna Connector | 1x SMA Female connector for Cellular or Wi-Fi antenna |
| SIM Solt | 1x Micro SIM (12mm*15mm) |
| USB Port | 1x USB 2.0, support USB peripherals (like WiFi adaptor) |
| Console Port | 1 x UART type-C connector |
| Button | 1x button for Reboot and Reset |
| Power Supply | 9 ~ 48 VDC, 12 ~ 30 VAC |
| LED Indicator | Power x 1, System x 1, Cellular WAN x 1, WAN x 1, COM trans x 4 (TX + RX) |
| Dimension (LxWxH) | 108.7mm x 103mm x 27mm (LxWxH) |
| Weight | 340 g (0.75 lb) |
| Operating Temperature | Industrial-grade -40 to 85°C (-40 to 185°F) |
| Pre-installed OS | Linux 5.10 |
| OT-to-IT Data Collect and Convert | Modbus RTU/ASCII/TCP Master/Slave, BACnet MSTP/IP IEC104, DNP3, OPC UA, EtherNet/IP, PLC protocols, MQTT, Sparkplug B... Powered by ElastPro |
| Secondary Development | Python, C, C++, Go, Check More... |
Check the Specifications Tab for more details.
Applications
With these versatile capabilities, the EC212 is prefect for kinds of serial to Ethernet gateway, like PLCs/meters/sensors data to cloud. Or as a protocols conversion gateway.
Modbus Gateway
Benefit with ElastPro software, just few visible steps configuration to Data collect from Modbus RTU slave devices, convert to Modbus TCP, or post to cloud MQTT. It is perfect as a Modbus Gateway. Learn More...
Protocol gateways
Powered by ElastPro software, EC212 support industrial protocol conversion between Modbus, BACnet, OPC UA, and more. It enables seamless OT-to-IT data exchange and integration as a Protocol Gateway. Learn More...
Specifications
| System | |
| CPU | ARM Cortex-A7 @1.1GHz |
| RAM | 64MB DDR2 |
| Storage | 256MB SLC Nand Flash |
| Storage Expansion | 1x TF slot (up to 128GB) |
| Serial Interface | |
| Serial Port (Isolated) | 2 x RS-485/232 |
| Protection | Surge 4KV ESD ±15kV IEC61000-4-2 Air Discharge ESD ±15kV Human Body Model |
| Ethernet Interface | |
| Ethernet Port | 1 x Auto-sensing 10/100 Mbps Ethernet port |
| Protection | Surge 2KV ESD ±15kV IEC61000-4-2 Air Discharge ESD ±15kV Human Body Model |
| Wireless Interface | |
| Wireless Module Slot | 1 x miniPCle socket for Cellular module or Wi-Fi module |
| SIM Format | 1x Micro SIM (12mm*15mm) |
| Antenna Connector | 1x SMA Female connector for Cellular or Wi-Fi antenna |
| Cellular Band Options |
NA: Other options please contact Elastel representative. |
| Wi-Fi Band Options | 2.4～2.4835GHz or 5.15～5.85GHz IEEE802.11a/b/g/n/ac |
| USB Host | |
| USB 2.0 | 1 x USB 2.0, support peripheral devices (like USB Wi-Fi adaptor) |
| Power output | 5V@500mA (switch on/off programmable) |
| Protection | Output Over Load protection ESD ±8kV IEC61000-4-2 Air Discharge ESD ±6kV Human Body Model |
| Other Interface | |
| Console Port | 1 x UART type-C connector |
| Button | 1x Button for Reset and Reboot |
| Power Parameters | |
| Power Input | 9 ~ 36 VDC, 9 ~ 24 VAC, recommended DC 12V/1.5A |
| Power Consumption | Average: 5 W Peak: 10 W |
| Protection | Overvoltage & polarity reverse protection Surge 4KV ESD ±15kV IEC61000-4-2 Air Discharge ESD ±15kV Human Body Model |
| Indicators | |
| LED Indicator | Power x 1, System (programmable) x1, Cellular WAN x1, ETH x1, COM<x> trans x 4 (TX + RX) |
| Cellular LED status | Searching network: Slow flashing (200ms ON/1800ms OFF) Idle Status: Slow flashing (1800ms ON/200ms OFF) Transmission: Fast flashing (125ms ON/125ms OFF) |
| Buzzer | Built-in buzzer x 1, for warning alarm (programmable) |
| Reliability | |
| RTC | Built-in RTC with Backup CR2032 button battery |
| Watchdog | Built-in WDT for auto recovery |
| Physical Characteristics | |
| Dimension | 108.7mm×103mm×27mm(L×W×H) |
| Housing | IP30 Metal |
| Installation | DIN-rail mounting Wall mounting |
| Weight | 340 g (0.75 lb) |
| Environmental Limits | |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| Operating Temperature | -40 to 85°C (-40 to 185°F) |
| Storage Temperature (package included) | -40 to 85°C (-40 to 185°F) |
| Certifications | |
| CE | EN55032/35 IEC61000-4-2/3/4/5/6 IEC 62368-1 IEC 62311 |
| FCC | FCC PART 15B ANS1C63.4:2014 |
| RoHS | IEC62321-3/4/5/6/7/8 |
| Software Features | |
| Pre-installed OS | Linux 5.10.160 |
| OT-to-IT Integration | Modbus RTU/ASCII/TCP Master/Slave, BACnet MSTP/IP IEC104, DNP3, OPC UA, EtherNet/IP, PLC protocols, MQTT, Sparkplug B…data collect and conversion Powered by ElastPro |
| Secondary Development | Python, C, C++, Go |
| Package Contents | |
| Device | 1 x EC212 device with Terminal Block preinstalled |
| Antenna | Mag-mount Antenna (SMA Male, 1 meter, 12dBi). Only for cellular or Wi-Fi version. |
| Installation Kit | 1 x DIN-rail kit |
| Warranty Period | 1 year |
1 review for EC212 Industrial DTU
Related products
-
ER550 Industrial Dual-SIM 5G Router
$589.00 – $599.00The Elastel Elink series industrial router ER550, is a dual-SIM 5G Gigabit router that integrates global 5G, and compatible 4G & 3G, with 5x 10/100/1000 Mbps GbE ports and dual-band Wi-Fi support, also extended 1xRS232 and 1xRS485 serial ports for industrial usages.
- ★ Dual-SIM seamlessly failover for Global 5G/ 4G LTE/ 3G cellular networks
- ★ 5x 10/100/1000 Mbps Gigabit Ethernet ports (1-WAN 4-LAN, or 5-LAN)
- ★ 2.4G & 5.8G Hz Dual-band Wi-Fi, Up to 866.7Mbps speed
- ★ Dual-core ARM Cortex-A53@ 1GHz CPU, 512MB RAM + 4GB eMMC, with OpenWrt based OS
- ★ Industrial rugged and reliablity, -35°C to +75°C Operating Temperature
- ★ Dual-SIM seamlessly failover for Global 5G/ 4G LTE/ 3G cellular networks
-
EG500 Edge Computing Gateway
$490.00 – $669.00Elastel EG500 is an Industrial Raspberry Pi engineered as an Edge Computing Gateway for IIoT applications.
- ★ Powered by RPi CM4, variant RAM + eMMC editions available
- ★ Rich industrial interfaces and networking for flexible connectivity
- ★ Industrial-grade design for Reliability, CE FCC… certified
- ★ Open Raspbian OS easy development, pebuilt ElastPro for OT-to-IT
-
ER200 Compact Industrial Cellular Router
$159.00 – $168.00The Elastel Elink series industrial cellular router ER200, is an IoT cellular router that integrates 4G LTE, Wi-Fi, and dual 10/100 Mbps Ethernet ports for IoT Edge Connectivity and communication applications.
- ★ Global 4G LTE/ 3G/ 2G, CAT4, CAT M1, NB-IoT networks compatible
- ★ 2x 10/100 Mbps ETH ports (1-WAN 1-LAN, or 2-LAN), Wi-Fi integrated
- ★ Compact size with DIN-Rail and panel mounting Supported
- ★ Plug-and-play, easy to use webUI for configuration and program
- ★ -35°C to +75°C Operating Temperature, Industrial rugged and reliablity
Clinton Marsh –
perfect for our energy station monitoring solution, thank you.