ER550 Industrial Dual-SIM 5G Router
July 21, 2023
EW8811 Wi-Fi Module
October 31, 2023
EG324 Lite IoT Gateway
$195.00 – $240.00
Elastel EG324 Lite is an ARM-based embedded computer designed as a versatile and cost-effective Industrial IoT gateway. The Lite version optimizes CPU and RAM for a cost-effective balance of performance.
- ★ ARM64 A35 dual-core @800MHz CPU, 128MB RAM + 8GB eMMC
- ★ Rich industrial interfaces for flexible connectivity
- ★ Truly Open and Programmable OS, prebuilt ElastPro for OT-to-IT
- ★ Industrial-grade design for Reliability, CE FCC… certified
Description
Elastel EG324 Lite is an Arm-based high-performance industrial computer engineered as an Industrial IoT gateway. The Lite version has reduced CPU and RAM from EG324 for an optimal performance-to-cost balance while retaining the same design.
It offers 4 x RS485/232 COM ports, 2x 10/100 Mbps Ethernet ports, and a miniPCIe socket for 4G LTE/3G/2G/NBIoT or Wi-Fi connectivity.
With full industrial-grade design, it operates reliably in -40 °C to +85 °C and harsh EMI/surge environments. CE, FCC, RoHS... certified.
Pre-installed Linux OS and ElastPro software, make it ready for your OT-to-IT integration, while flexible programmability for specific solutions.
Comparison
| Model | EG324 | EG324 Lite |
|---|---|---|
| CPU | ARMv7 Quad-core Cortex-A9 @1.4 GHz | ARM64 dual-core A35 @800MHz |
| RAM | 512MB (1GB optional) | 128MB (512MB optional) |
| Storage | 8GB eMMC | |
| Storage Expansion | 1x TF Slot | |
| Serial Port (Isolated) | 2 x RS485 + 2 x RS232/485 | |
| Ethernet Port | 2 x 10/100 Mbps ports (RJ45 connector), 1x WAN, 1xLAN or 2xLAN configurable | |
| Wireless Module Slot | 1 x mPCle slot for Cellular module or Wi-Fi module | |
| Antenna Connector | 1x SMA Female connector for Cellular or Wi-Fi antenna | |
| USB Port | 1 x USB 2.0, support USB peripherals (like WiFi adaptor) | |
| Console Port | 1 x UART type-C connector | |
| Button | 1x button for Reset and Upgrade | |
| Power Supply | 9 ~ 48 VDC, 12 ~ 30 VAC | |
| LED Indicator | Power x 1, System x 1, Cellular WAN x 1, WAN x 1, COM trans x 8 (TX + RX) | |
| Dimension (LxWxH) | 128.8mm x 117mm x 28mm (LxWxH) | |
| Weight | 470 g (1.04 lb) | |
| Operating Temperature | Industrial-grade -40 to 85°C (-40 to 185°F) | |
| Pre-installed OS | Ubuntu core 20.04 | Linux 5.10 |
| OT-to-IT Data Collect and Convert | Modbus RTU/ASCII/TCP Master/Slave, BACnet MSTP/IP, IEC104, DNP3, OPC UA, EtherNet/IP, PLC protocols, MQTT, Sparkplug B... Powered by ElastPro |
|
| Secondary development | Docker, Node-Red, Python, C, C++, C#, Go, Java, JavaScript |
Node-Red (optional), Python, C, C++, C#, Java, JavaScript. Check More... |
Check the Specifications Tab for more details.
Applications
With high-performance, reliability, easy-to-use, and cost-effective characteristics, also open Linux OS, EG324 Lite could be in any kinds of your applications.
Modbus Gateway
Benefit with ElastPro software, just few visible steps configuration to Data collect from Modbus RTU slave devices, convert to Modbus TCP, or post to cloud MQTT. It is perfect as a Modbus Gateway. Learn More...
OPC UA Gateway
With built-in ElastPro software, EG324 Lite connects to OPC UA servers to collects data, and forwards it via Modbus TCP, MQTT, or its own OPC UA server. It’s a secure and efficient OPC UA Gateway. Learn More...
Specifications
| System | |
| CPU | ARM64 dual-core A35 @800MHz |
| RAM | 128MB (512MB optional) |
| Storage | 8 GB eMMC |
| Storage Expansion | 1x TF slot (up to 128GB) |
| Serial Interface | |
| Serial Port (Isolated) | 2 x RS485 + 2 x RS-232/485 |
| Protection | Surge 4KV ESD ±15kV IEC61000-4-2 Air Discharge ESD ±15kV Human Body Model |
| Ethernet Interface | |
| Ethernet Port | 2 x Auto-sensing 10/100 Mbps Ethernet port |
| Protection | Surge 2KV ESD ±15kV IEC61000-4-2 Air Discharge ESD ±15kV Human Body Model |
| Wireless Interface | |
| Wireless Module Slot | 1 x miniPCle socket for Cellular module or Wi-Fi module |
| SIM Format | 1x Micro SIM (12mm*15mm) |
| Antenna Connector | 1x SMA Female connector for Cellular or Wi-Fi antenna |
| Cellular Band Options |
NA: Other options please contact Elastel representative. |
| Wi-Fi Band Options | 2.4～2.4835GHz or 5.15～5.85GHz IEEE802.11a/b/g/n/ac |
| USB Host | |
| USB 2.0 | 1 x USB 2.0, support peripheral devices (like USB Wi-Fi adaptor) |
| Power output | 5V@500mA (switch on/off programmable) |
| Protection | Output Over Load protection ESD ±8kV IEC61000-4-2 Air Discharge ESD ±6kV Human Body Model |
| Other Interface | |
| Console Port | 1 x UART type-C connector |
| Button | 1x Button for Reset and Reboot |
| Power Parameters | |
| Power Input | 9 ~ 48 VDC, 12 ~ 30 VAC, recommended DC 12V/1.5A |
| Power Consumption | Average: 6 W Peak: 10 W |
| Protection | Overvoltage & polarity reverse protection Surge 4KV ESD ±15kV IEC61000-4-2 Air Discharge ESD ±15kV Human Body Model |
| Indicators | |
| LED Indicator | Power x 1, System (programmable) x1, Cellular WAN x1, ETH x1, COM<x> trans x 8 (TX + RX) |
| Cellular LED status | Searching network: Slow flashing (200ms ON/1800ms OFF) Idle Status: Slow flashing (1800ms ON/200ms OFF) Transmission: Fast flashing (125ms ON/125ms OFF) |
| Buzzer | Built-in buzzer x 1, for warning alarm (programmable) |
| Reliability | |
| RTC | Built-in RTC inside with Backup CR2032 button battery |
| Watchdog | Built-in WDT inside for auto recovery |
| Physical Characteristics | |
| Dimension | 128.8mm×117mm×28mm (L×W×H) |
| Housing | IP30 Metal |
| Installation | DIN-rail mounting Wall mounting |
| Weight | 470 g (1.04 lb) |
| Environmental Limits | |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| Operating Temperature | -40 to 85°C (-40 to 185°F) |
| Storage Temperature (package included) | -40 to 85°C (-40 to 185°F) |
| Certifications | |
| CE | EN55032/35 IEC61000-4-2/3/4/5/6 IEC 62368-1 IEC 62311 |
| FCC | FCC PART 15B ANS1C63.4:2014 |
| RoHS | IEC62321-3/4/5/6/7/8 |
| Software Features | |
| Pre-installed OS | Linux 5.10 |
| OT-to-IT Integration | Modbus RTU/ASCII/TCP Master/Slave, BACnet MSTP/IP IEC104, DNP3, OPC UA, EtherNet/IP, PLC protocols, MQTT, Sparkplug B… data collect and conversion Powered by ElastPro |
| Secondary Development | Node-Red (optional), Python, C, C++, C#, Java, JavaScript |
| Package Contents | |
| Device | 1 x EG324 Lite device with Terminal Block preinstalled |
| Antenna | Mag-mount Antenna (SMA Male, 1 meter, 12dBi). Only for cellular or Wi-Fi version. |
| Installation Kit | 1 x DIN-rail kit |
| Warranty Period | 1 year |
1 review for EG324 Lite IoT Gateway
Related products
-
ER500 Industrial Dual-SIM Cellular Router
$228.00 – $238.00The Elastel Elink series industrial cellular router ER500, is a dual-SIM cellular router that integrates global 4G LTE, with 5x 10/100 Mbps Ethernet ports and Wi-Fi support, also extended 1xRS232 and 1xRS485 serial ports for industrial usages.
- ★ Dual-SIM seamlessly failover for Global 4G LTE/ 3G/ 2G networks
- ★ 5x 10/100 Mbps ETH ports (1-WAN 4-LAN, or 5-LAN), Wi-Fi integrated
- ★ Easy-to-use webUI with prebuilt Serial-to-IP data SCADA features
- ★ -35°C to +75°C Operating Temperature, Industrial rugged and reliablity
- ★ Dual-SIM seamlessly failover for Global 4G LTE/ 3G/ 2G networks
-
EG500 Edge Computing Gateway
$490.00 – $669.00Elastel EG500 is an Industrial Raspberry Pi engineered as an Edge Computing Gateway for IIoT applications.
- ★ Powered by RPi CM4, variant RAM + eMMC editions available
- ★ Rich industrial interfaces and networking for flexible connectivity
- ★ Industrial-grade design for Reliability, CE FCC… certified
- ★ Open Raspbian OS easy development, pebuilt ElastPro for OT-to-IT
-
EW8811 Wi-Fi Module
$30.00The Elastel EW8811 is a mini-PCIe type Wi-Fi Module powered by REALTEK RTL8811CU, support IEEE802.11a/b/g/n/ac protocols with 2.4GHz and 5.8GHz bands.
- ★ Compatible with all Elastel product models
- ★ 2.4GHz and 5.8GHz dual bands support
- ★ Mini-PCIe type interface easy installation and wide compatibility
- ★ -30°C to +85°C Operating Temperature.
- ★ Compatible with all Elastel product models
Alex Otal –
very good choice for me, enough and cost-save!